Harley Davidson Saddlebag Bolt-on Systems

Easy Brackets are an innovative two (2) point docking system that allows the quick and easy installation and removal of saddlebags. Easy Brackets use two (2) existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place.

Because we make our Easy Brackets specifically for your Harley Davidson model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your Harley Davidson motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.

All models are $149.95 per set (both sides) and includes all necessary hardware. For product details, see our 'About' page or our Product Diagram.

If you want to convert your saddlebags on your Harley Davidson to an easy-to-carry piece of luggage, be sure to check out our Easy-Tote system. It's a single strap with special docking posts that connect together the saddlebags when they're off the motorcycle, making them easy to carry.

Harley Davidson

All Softails, including Fatboy.
Fits on the following: FLSTC/FLSTCI Heritage Softail Classic; FLSTS/FLSTSI Heritage Springer; FXSTB/FXSTBI Night Train; FXSTS/FXSTSI Spring Softail; FXST/ FXSTI Softail Standard; FLSTF / FLSTFI Fat Boy, Heritage Nostalgia & Heritage Special and all other Softails not otherwise listed. For Deuce, see its separate listing below. *If you have a Heritage Softail, do not use these brackets with Harley Davidson brand saddlebags, instead use the HRT Series brackets listed below.*
ST-R1	Attaches to the front two existing bolt holes in the fender rail. (If you have a backrest see kits ST-R1HB and ST-R1DB) Fits all model years.
ST-R1HB	Attaches to the front two existing bolt holes in the fender rail. *For use with Hard Mount Backrest.* Fits all model years.
ST-R1DB	Attaches to the front two existing bolt holes in the fender rail. *For use with Detachable Backrest.* Fits all model years.
ST-L1	Recommended for larger saddlebags (up to 21" wide). It uses the same docking points as the detachable backrest. Turn signals must be relocated off the fender rail to tail light area.
ST-L1DB	Recommended for larger saddlebags (up to 21" wide). Turn signals must be relocated off the fender rail to tail light area. *For use with Detachable Backrest.*
Heritage Softails
For use with Heritage Softails that are using existing Harley Davidson Heritage saddlebags *only*. Will not work with stock Heritage Springer saddlebags.
HRT-R1	Fits all Heritage Softails 1999 and older. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R1DB	Fits all Heritage Softails 1999 and older. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
HRT-R2	Fits Heritage Softails 2000 through 2002. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R2DB	Fits Heritage Softails 2000 through 2002. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
HRT-R3	Fits 2003 Heritage Softails. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system.
HRT-R3DB	Fits 2003 Heritage Softails. *For use with existing Heritage Saddlebags.* Replaces all existing hardware and converts the Heritage bags into a true detachable system. For use with motorcycles w/ Detachable Backrest.
FLH / Shovelhead
VC-R1	Fits FLHs with a fender nut spread of 7 1/4", center to center.
FXR
FXR-R1	Fits FXR Models 1990 to present. Used with small to medium saddlebags (12" to 14" wide). Attaches to the front hole in the fender rail and turn signal hole after *turn signal is relocated off fender rail.*
All Dynas
For HD Dyna FXDWG 1990 to present and HD Dyna FXD, FXDL or FXDX 1996 to present.
DNA-R1	Attaches to the front existing bolt hole and the turn signal hole. *Turn signal must be relocated to rear hole.* Must have minimum 2" clear between turn signal and Easy Bracket rear mounting point. (If you have a detachable backrest, see kit DNA-L1)
DNA-R1HB	For Dynas with Hard mount backrest only. If you have a detachable backrest, see kit DNA-L1. Attaches to the front existing bolt hole and the turn signal hole. *Turn signal must be relocated to rear hole*. Must have minimum 2" clear between turn signal and Easy Bracket rear mounting point.
DNA-L1	For use with detachable backrest; uses same docking points as detachable backrest (bolt holes 10 3/8" center to center). *Turn signal must be relocated off fender rail to tail light area.*
Sportsters & Huggers
SPT-R1	Fits 1994 through 2003 Sportsters including XLH 883 Hugger, XL 883R, XLH 883, SL 883C Custom, XL 1200C Custom, XLH 1200 & XLH 883 Custom (will not work on XL1200S). Attaches to the front hole in fender rail and turn signal hole after *turn signal is relocated off the fender rail to tail light area*.
SPT-R2	COMING SOON! Fits 2004 later Sportsters including XLH 883 Hugger, XL 883R, XLH 883, SL 883C Custom, XL 1200C Custom, XLH 1200 & XLH 883 Custom (will not work on XL1200S). Attaches to the front hole in fender rail and turn signal hole after *turn signal is relocated off the fender rail to tail light area*.
Deuce
DUC-R1	For use will all Duece models. Turn signals remain in factory location. Must be used with a mounting kit, manufactured and sold separately by Great Bike Gear (Easy Bracket Dealers will also carry this kit). For more details and pictures, please see the Great Bike Gear website.